How to apply one material multi-forging die forging method

Published Time:

2023-01-17

Multi-forging with one die and multi-forging with one die can improve the use function, economy and forging efficiency of the forging die, but it will also increase the size of the forging die and the tonnage of the equipment.

Multi-forging with one die and multi-forging with one die can improve the use function, economy and forging efficiency of the forging die, but it will also increase the size of the forging die and the tonnage of the equipment. When the size of the forging die and the tonnage of the equipment are insufficient, it will easily lead to difficult forming. and low forging efficiency. The speed regulating hammer is a small die forging with a single weight of <0.2kg (see Figure 1). The parts are made of two materials: alloy steel 12CrNi3A~high temperature alloy GH4080A, and the die forging forming methods are obviously different. 12CrNi3A steel has few constraining conditions for die forging, and the die forging process is better. It is suitable for one die for multiple forging, reverse die forging, continuous multiple forging and multiple forging. When one die is used for multiple forgings, one material for two or one material for three forgings can be realized; or when one die is forged and then one die is used for multiple forgings, one material for four forgings or one material for six forgings can be realized. The superalloy GH4080A die forging has many constraints, such as low plasticity, high deformation resistance, strong adhesion, strong sensitivity to heating rate, narrow forging temperature range, strict requirements on forging temperature, low thermal conductivity, and high resistance to strain rate. Strong sensitivity to stress state, obvious cold hardening tendency, high recrystallization temperature and slow speed, wide critical deformation range and no allotropic transformation during heating and die forging, etc., the die forging process is extremely poor , it is not suitable for multiple forging with one die, reversing die forging, continuous multiple forging, composite die forging and multi-piece forging, etc., but only suitable for one material and one forging.

Related News

The difference between forging and casting?

The difference between forging and casting: Words have different meanings: Forging: Using methods such as hammering to make a metal material in a plastic state into a workpiece with a certain shape and size, and to change its physical properties.

Analysis of the current situation of forging machinery industry in China

In recent years, China's Forging Machinery volume forming equipment and sheet metal processing equipment have developed in parallel.

2020 FIA Annual Meeting

Due to the worldwide outbreak of the potentially deadly SARS-CoV-2 virus (“coronavirus”), the Executive Committee of the Board of Directors has decided to cancel the 2020 Annual Meeting of Members scheduled for May 1-3 at the Ritz-Carlton hotel in Naples, Florida.

Forging flash butt welding and its application

Flash butt welding is to assemble the weldment into a butt joint, turn on the power and slowly move the welded end surface of the weldment close to the local contact, and use the generated resistance heat to quickly heat the contact point to high temperature and melt, resulting in a strong metal Splash, forming flash that is, the burning process "then, continue to move closer to the welded end face to make it flash and heat further, until the entire welded end face reaches a predetermined temperature within a certain depth range, and quickly apply upsetting pressure to complete the welding process .

Analysis on Forming Technology of Gear Forging

The forming method is based on the complexity of the geometric shape of the forging and the dimensional accuracy and position requirements of the forging.

Message

If you have any questions, please contact us!

Submission